POF 04 Reflow controller
The aim of this project is to set up a low-budget but fully functional automated reflow soldering system. The information below will help you go through all the steps needed to create something similar to this:
All the information for this project is contained in a series of posts on the JeeLabs daily weblog:
- 2009-07-13 - My first reflow (original post)
- 2010-05-09 - Reflow revisited
- 2010-05-10 - Setting up the thermocouple node
- 2010-05-13 - Setting up JeeMon
- 2010-05-14 - Oven temperature plot - source code app-plotter.tcl
- 2010-05-15 - Controlling the oven
- 2010-05-16 - Temperature control - source code app-thermostat.tcl
- 2010-05-19 - Reflow profiles - source code app-reflow.tcl
- 2010-11-01 - Conquering the thermocouple
- 2010-11-02 - Reflow profiles, again
- 2010-11-03 - Meet the Reflow Timer
- 2010-11-04 - Reflow Timer software
- 2010-11-05 - Smooth sailing
You're welcome to deviate from this path and make your own improvements. Copying is fine, that's the whole point of this project. Doing it yourself is fun. Hacking things your own way can be even more fun.
