POF 05 LED strip controller

This project describes some hardware and software to turn a JeeNode into a remote-controlled 4-channel LED strip controller:

It was built to fix the lighting of a "white" LED strip, which turned out to be a bit more greenish than expected. IOW, add an adjustable RGB LED strip next to the old one to compensate for white balance!

Here's the result (unmodified strip on the left, adjusted strip on the right):

This project was described on the JeeLabs daily weblog in the following articles:

• 2010-06-13 - Driving an RGB strip with MOSFETs
• 2010-06-14 - RGB driver board
• 2010-06-15 - Remote RGB strip control
• 2010-06-16 - A little GUI for the RGB LED strip
• 2010-06-17 - RGB via the Dimmer Plug