JeeNode (v3)

Changes in v3

One clear change in the “JeeNode v3” board is that it’s now labeled (silk-screen). Other changes:

• The Ports header pinouts have changed, pins 4 and 5 have been swapped (AIO and +3V).
• The ISP/SPI header pinout has changed, pins 1..6 are now the ISP connector (3..8 in v2).
• The PWR/I2C header pinout has changed, PWR and GND have been swapped.
• Added 2 pads for connecting a battery / battery holder, with strain relief and +/- markings.
• Ports are now labeled Port1 .. Port4, with each pin labeled with its function.
• The v3 boards are blue with white markings (was green in v2).
• Identifying text on both sides of the board. Also a URL and copyright note.
• New copper trace routing using FreeRouter, for shorter traces and fewer vias.
• The v3 board was designed in collaboration with Paul Badger of Modern Device.

The previous version is JN2.