Project

General

Profile

Jee Plug

The JeePlug is a general-purpose mini-board which “happens” to be particularly convenient for use with “ports”. It’s a small 8 x 10 hole prototype board for simple interconnect tasks to components and connectors.

Here is the back side (of an RTC plug), with headers mounted flat:

See http://jeelabs.org/tag/jeeplug/ for all weblog posts related to JeePlugs.

Configuration

There is nothing to configure. This board contains no components, only a few wire connections.

h. Header Pinouts

There are two pairwise connected rows of pads on the outside of the board:

Design Info

Dimensions: 21.1 x 26.6 mm
CadSoft EAGLE design files: see below.

How to Get It

http://jeelabs.com/products/jeeplug


jp1.picture-35.png (95.5 KB) myra, 2012-07-17 15:30

jp1.DSC_0821.jpg (10.8 KB) myra, 2012-07-17 15:30

pinout.png (17.9 KB) myra, 2012-07-17 15:30

jlpcb-104.png (62.6 KB) myra, 2012-07-17 16:40

jlpcb-104.pdf (8.19 KB) myra, 2012-07-17 16:40

jlpcb-104.sch (8.32 KB) myra, 2012-07-17 16:40

jlpcb-104.brd (12 KB) myra, 2012-07-17 16:40