Project

General

Profile

Pinouts

Quick reference cards

The “qrc” files for these are attached in various formats - see the end of this page.

The original versions were created and contributed by Marco Bakker (@mars).

JeeNode KIT/SMD/USB

Note: the bottom 2x4 header has an error, the SCK and RESET header pins are reversed.

See below for the legend (omitted here to fit the image on the page).

JeeNode Micro v3

Carrier Board

Errata: The positions of the Jeenode modules shown below are reversed. The top carrier board layout matches the radio module to the left, the next matches the radio module to the right.

JeeNode v5

JN5-pinout.png (221 KB) jcw, 2012-10-06 10:05

CB-colors.pdf (31.6 KB) jcw, 2012-10-06 10:05

CB-colors.png (113 KB) jcw, 2012-10-06 10:05

JN-colors.pdf (39.7 KB) jcw, 2012-10-06 10:05

JN-colors.png (107 KB) jcw, 2012-10-06 10:05

JN5-pinout.pdf (76.4 KB) jcw, 2012-10-06 10:05

qrc-jm-v3-part.png (256 KB) jcw, 2013-03-22 20:30

qrc-jn-v6-part.png (458 KB) jcw, 2013-03-22 20:30

qrc-jm-v3-part-narrow.png (275 KB) jcw, 2013-03-22 20:34

qrc-jn-v6-part-narrow.png (214 KB) jcw, 2013-03-22 20:34

qrc-jm-v3.graffle.zip - JeeNode Micro v3 - OmniGraffle (84.6 KB) jcw, 2013-03-22 20:36

qrc-jm-v3.vdx.zip - JeeNode Micro v3 - Visio (300 KB) jcw, 2013-03-22 20:36

qrc-jn-v6.graffle.zip - JeeNode v6 - OmniGraffle (118 KB) jcw, 2013-03-22 20:36

qrc-jn-v6.vdx.zip - JeeNode v6 - Visio (326 KB) jcw, 2013-03-22 20:36

qrc-jm-v3.pdf - JeeNode Micro v3 - PDF (154 KB) jcw, 2013-03-22 20:37

qrc-jn-v6.pdf - JeeNode v6 - PDF (206 KB) jcw, 2013-03-22 20:37