JeeNode (v2)

Changes in v2

The “JeeNode v2” board has some changes, but is still mostly identical to the first prototype:

• Flipped the FTDI connector over, so an FTDI breakout board connects the “right way up”.
• Exchanged outer pin 1 and 6 on all ports, to reduce potential damage on accidental shorts.
• Made changes to the TWI/Power connector pinout.
• Moved things around slightly, port pairs 1/2 and 3/4 are both 0.1” further apart.
• All connectors are now labeled with some text on the top copper layer.
• Added “JeeNode v2” label to the bottom copper layer, as well as a ground plane.
• The board was made slightly narrower, with excess borders trimmed off.
• Three mounting holes were dropped.

There is no documentation for the first version, i.e. JN1.