General

Profile

hatfieldr

Issues

Projects

Activity

2015-01-12

22:02 JeeLabs Café Support: RE: Using Jeelink V3 as Rfm12Pi
Hi John
Many thanks for your help, the problem is now solved!
The problem was with the software linking to the radio ...
15:50 JeeLabs Café Support: RE: Using Jeelink V3 as Rfm12Pi
the one I am using is https://github.com/jcw/jeelib/tree/master/examples/RF12/RF12demo
The unit is now transmitting ...
11:36 JeeLabs Café Support: RE: Using Jeelink V3 as Rfm12Pi
I have set it to 433Mhz using screen but this should have been done from the software Group & node id are also correc...
10:46 JeeLabs Café Support: RE: Using Jeelink V3 as Rfm12Pi
using
screen /dev/ttyUSB0 9600
It would appear it is set to the wrong frequency 868 MHz not 433MHz
10:39 JeeLabs Café Support: RE: Using Jeelink V3 as Rfm12Pi
Yes but the Jeelink is not setup correctly (Frequency, Nodeid) & received packets cannot be decoded
There are 2 lates...
10:13 JeeLabs Café Support: RE: Using Jeelink V3 as Rfm12Pi
Hi
The FTDI device is recognised (I use the same laptop for programing Arduinos)
I have set the baud rate to 9600
The...

2015-01-11

22:58 JeeLabs Café Support: Using Jeelink V3 as Rfm12Pi
Hi
I am trying to set up my Ubuntu laptop using a Jeelink V3 at 433 Mhz to run software which is currently running on...

2014-10-10

23:27 JeeLabs Café Support: RE: Using Output plug
Many Thanks!
I think I now have a working sketch to operate 8 relays independently using the Output Plug!
I looked e...
17:47 JeeLabs Café Support: RE: Using Output plug
yes but I am trying to control each output independently
I therefore wish to find the code to turn each output on & o...
15:47 JeeLabs Café Support: Resolved: Using Output plug
Hi I’m new to Jee Labs & a novice programmer. I’m trying to use an output plug on an arduino clone (from openenergymo...

Also available in: Atom