General

Profile

alx37

Issues

Projects

Activity

2014-03-25

13:33 JeeLabs Café General: RE: Best position for temperature sensors in domestic rooms
What I’m also doing is monitoring my Vaillant boiler/heater:
Heating Water before and after radiators.
Stored warm wa...

2014-03-23

10:18 JeeLabs Café Support: RE: Exactly what do I need to get going with a JeeNode Micro? Should I?
Your hassle will be one-time.
I was in the same position and tried out Openenergymonitor. These parts are nice(EmonTH...

2014-03-22

23:48 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu
I had a lockup on both my gas and electricity meter.
I suspected it to be batteries empty but it wasn’t.
Only thing I...

2014-03-18

18:20 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu
loop part improved.
another test run now error seems further lowered.
18:07 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu

void loop() {
loopcount++;
//Serial.println("ein");
digitalWrite(IRpower, HIGH); // turn IR ...

2014-03-17

20:46 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu
I just changed to 220 Ohm resistor and I’m waiting for results.
Sketch above, your feedback welcome…
ALexander
20:45 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu
#define RF69_COMPAT 1
#include
#include
#define BOOST 1 // measure battery on analog pin if ...
09:59 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu
Yes, i did. I also tried successfully via reed contact switch which is working ok but precision is 100 litres per pul...
09:25 JeeLabs Café Support: RE: Pulse Counting Ferraris JNu
Thank you
Clearer mind in the morning.
The bad thing is, these errors are completely random, it is not the wheel hav...

2014-03-16

23:39 JeeLabs Café Support: Pulse Counting Ferraris JNu
I like to count pulses on an ferraris electrical meter
[[http://de.wikipedia.org/wiki/Ferraris-Z%C3%A4hler]]
The ree...

Also available in: Atom