General

Profile

joop

Issues

Projects

Activity

2015-07-06

08:34 JeeLabs Café Support: RE: LaCrosse TX4-868
Was for old LaCrosse protocol.

2013-10-30

07:49 JeeLabs Café Support: RE: Resolved: Decoding FS20 of FS20S6A (6 Button switch)
Hi,I checked mine values
I always had good results with this configuration on different jeenodes : (868Mhz)
static v...

2013-08-13

08:58 JeeLabs Café General: RE: Help with 433mHz ByeByeStandby remotes
when using 433 Mhz : these values can be used (Forum Jorge).
http://jeelabs.net/boards/7/topics/288?r=804\#message-80...

2013-02-13

21:22 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Jorge,thanks for your investigation ,I will update the wiki with your findings.
Because you are using the flat SMD c...

2013-02-06

14:17 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
The timing from cresta (pulse-width) is close to oregon.
**Oregon**
if (200 \<= width && width \< 1200) {
byte w = ...
10:56 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
You certainly should change the capacitor ,it will make a big difference.
Nice that it all works , now it needs some ...

2013-02-05

19:24 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
![](http://jeelabs.net/attachments/download/767/jeenode_4.7nf.JPG) ![](http://jeelabs.net/attachments/download/766/TH...
15:06 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
When you disable the OOK-mode and put it in JeeNode mode see below
The led stays out ?
void setup () {
t...

2013-02-04

17:57 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
It should not be related to the hardware modification , be sure to
set the led of. digitalWrite(DEBUG\_LED, 0);
befor...
12:34 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Interesting Jorge ,
*With the window open, the LED is on all the time.*
This is strange , this means when window ope...

Also available in: Atom