General

Profile

juewis

  • Personal page (URL): http://www.wissing-ms.de
  • Registered on: 2012-12-13
  • Last connection: 2016-05-29

Issues

Projects

Activity

2013-09-08

09:25 JeeLabs Café Support: RE: Decoding RF12 packets (in Python..)
The light intensity is one byte.
The remaining 4 variables (19 bits) are packed into three bytes (24 bits).
RF12Demo ...

2013-09-07

21:16 JeeLabs Café Support: RE: Decoding RF12 packets (in Python..)
I have done some more investigation on the topic and inspired by the article of jcw i did some tests.
The above scri...

2013-08-30

13:43 JeeLabs Café Support: RE: Decoding RF12 packets (in Python..)
i wasn’t aware of the bitstring module.
I modified my previous script, which should now also be usable for the jeelib...

2013-08-29

17:28 JeeLabs Café Support: RE: Decoding RF12 packets (in Python..)
I would imply that some additional bit shifting is required in your case.
I’m not familiar with the Housemon solution...
08:07 JeeLabs Café Support: RE: Decoding RF12 packets (in Python..)
Hi mpe,
i’m using this script to decode the payload from my sensors:
# -*- coding: utf-8 -*-
from serial imp...

2013-07-03

18:36 JeeLabs Café Support: RE: [Solved] Can not upload sketch via carrier board
Hello,
a final comment from me.
I have also soldered in the headers and pins for SPI/ISP and thus could get rid of th...

2013-06-30

20:24 JeeLabs Café Support: RE: Can not upload sketch via carrier board
Hello martynj,
thank you very much for your help.
I connected the RST pin on the jeenode with a wire to the RST pin o...
17:44 JeeLabs Café Support: RE: Can not upload sketch via carrier board
@martynj, i thought that is the capacitor on the carrier board?

2013-06-29

19:24 JeeLabs Café Support: (Resolved) Can not upload sketch via carrier board
Hello,
i’m trying to assemble a remote home monitoring system.
My first component is a JeenodeSMD mounted to a carri...

Also available in: Atom