General

Profile

julle.p

  • Personal page (URL): http://www.RCcruise.dk
  • Registered on: 2016-10-14
  • Last connection: 2017-05-04

Issues

Projects

Activity

2017-05-18

15:05 JeeLabs Café Support: RE: RFM12B board not working together with Micro Pro? (No pin 11, 12, 13)
Yes, I have the fix now :-)
I can see that the default configuration has changed? Is that true? I believe the defa...
14:20 JeeLabs Café Support: RE: RFM12B board not working together with Micro Pro? (No pin 11, 12, 13)
Not sure why the code can run on the Mega without the radio :-) I'm not doing any magic tricks, just straight ahead.
...
12:57 JeeLabs Café Support: RE: RFM12B board not working together with Micro Pro? (No pin 11, 12, 13)
julle.p wrote:
> Yah! Success! I am now able to communicate between an Arduino Clone Micro Pro (Leonardo) and an off...
09:46 JeeLabs Café Support: RE: Low-power (Sleepy::loseSomeTime): Power usage for going in and out of low-power mode?
I have ended up buying a USB to Serial TTL. I should get that withing a couple of days :-)
No, it does not work to u...

2017-05-17

10:37 JeeLabs Café Support: RE: Low-power (Sleepy::loseSomeTime): Power usage for going in and out of low-power mode?
I'm using an USB to RS232 - not an USB to TTL serial :-) Thank you for your suggestions.
09:29 JeeLabs Café Support: RE: Low-power (Sleepy::loseSomeTime): Power usage for going in and out of low-power mode?
Solved. See these threads:
ProMicro (ATmega32U4): Serial not working after Sleepy::loseSomeTime
http://jeelabs.ne...
09:16 JeeLabs Café Support: RE: ProMicro (ATmega32U4): Serial not working after Sleepy::loseSomeTime
Found the issue: I don't have a RS232 to TTL converter, which means my USB-RS232 is not getting correct input data.

2017-05-15

09:14 JeeLabs Café Support: RE: ProMicro (ATmega32U4): Serial not working after Sleepy::loseSomeTime
Hmm, I gave it a try, but I only receive weird stuff...
Baud rate, etc, should all be correct.
~~~
void setup()
...

2017-05-10

13:17 JeeLabs Café Support: RE: ProMicro (ATmega32U4): Serial not working after Sleepy::loseSomeTime
Thank you!
You are absolutely right. It seems like Serial1 can be used all the time :-)
I therefore made a test b...

2017-05-09

09:22 JeeLabs Café Support: ProMicro (ATmega32U4): Serial not working after Sleepy::loseSomeTime
Hi All.
I'm using a Pro Micro with the ATmega32U4 (5V, 16MHz) microprocessor and built-in USB programmer.
Thi...

Also available in: Atom