General

Profile

jm_wsb

  • Registered on: 2013-01-09
  • Last connection: 2013-09-18

Issues

Projects

Activity

2013-09-18

18:10 JeeLabs Café General: RE: What I miss for 2 years now in the jeenode shop
Hi Mars & Martyn,
What I mean, can be such a housing as Mars is reffering to. This could be one of the new enclosure...

2013-09-16

20:12 JeeLabs Café General: What I miss for 2 years now in the jeenode shop
By the moment I’m reaching a point where I need to make a choose for implementing my home domotic to a full house.
N...

2013-09-11

22:02 JeeLabs Café Support: RE: new jeenode does not properly communicate with old one - freq issues
Hi Martyn,
this works indeed. Thanks.
It still remains difficult to determine the correct freq of the transmitted m...

2013-09-10

18:59 JeeLabs Café Support: new jeenode does not properly communicate with old one - freq issues
Helo,
since 3 months, I cope with the problem that my old jeenode v3 does not receive all packages of a new jeendoe ...

2013-01-25

16:27 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Hi Jardar,
thanks for the feedback
I tried it, but still no KAKU or ELRO signal received.
I gave up and ordered yes...

2013-01-20

21:28 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
no, led stays out
21:15 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
As FSK is very fast, I probabely never see the led burning ?
So there must be another test possible ?
I’va also order...
21:05 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
hi, I can confirm, this is the situation.
Can’t I test the same (with the led) for 868 MHz signals (I have a lot min...
20:46 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Ok, I’ve changed the led by a larger one.
Now it is the following behaviour:
It never burns.
Whe I connect it to G...
20:32 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
maybe not exactely correct,
The LED is burning a little bit, not full.
When I connect the led to the power, it burns ...

Also available in: Atom