General

Profile

jseixal

Issues

Projects

Activity

2013-02-12

23:37 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
After running some more test with different values for Data Rate and for GAIN and DRSSI, I think I got the best resul...

2013-02-06

00:38 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
I’ve had the capacitor replace on the Jeelink (the new is 220pf, within the 150-300pf range) but the results so far a...
01:01 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
I disabled the OOK-mode and indeed the LED stays off.
Then, I reverted the change and tried Jardar’s trick on the Re...

2013-02-05

01:00 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
I included the “test\_debug\_led ()” function but the result is the same as before.
The [ookDecoder] is displayed in...

2013-02-04

14:51 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Do you think it might be related to the hardware modifications?
I tried setting digitalWrite(DEBUG\_LED, 1); in the ...

2013-02-03

00:08 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Hi!
Over the weekend, I had the chance to have my jeelink listening this remote control which sends at 433MHz using ...

2013-02-01

23:44 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Yes, it’s blinking.
17:49 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Joop,
I had the LED added to the Jeelink (I asked for the change before reading you last post) and tried it with bot...

2013-01-31

13:34 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
That’s right. I’m trying to collect data from an Oregon Scientific temperature/humidity sensor that sends data on 433...

2013-01-30

00:19 JeeLabs Café Support: RE: OOK receiver based on modified Jeenode voor OOK, ELRO devices (pulling my hair out :-)
Hi Joop!
Thank you very much for your reply.
I tried ookRelay2.ino with the changes and still get nothing on the se...

Also available in: Atom