General

Profile

lightbulb

  • Registered on: 2013-03-27
  • Last connection: 2015-11-26

Issues

Projects

Activity

2015-11-24

17:21 JeeLabs Café Support: RE: package contents are wrong
Your welcome - glad your back and running again :)
—lightbulb

2015-11-20

19:10 JeeLabs Café Support: RE: Arduino 1.6.5+ errors with platform.txt / JN Micro
@All,
For what its worth, I run Arduino 1.6.6\> with this core set : http://highlowtech.org/?p=1695
and use ATTINT84...

2015-11-19

22:43 JeeLabs Café Support: RE: package contents are wrong
@Alban\_T,
Appols for delay - been busy. Anyhow - still on phone so still hard to read, but your problem is probably...

2015-11-17

22:58 JeeLabs Café Support: RE: package contents are wrong
@Alban\_T,
I am lazily on my phone reading this, so its hard to read all the code, and I’m not too familiar with SHT...

2015-10-04

17:20 JeeLabs Café Weblog: RE: Getting back in the groove
oh - and regarding you comment on “preserving”…..you are right it wont…..,
simply because it is more effort for the p...
17:15 JeeLabs Café Weblog: RE: Getting back in the groove
@johnO,
Yes - as I indicated, you ideally need a second value on your H/W loop linked to tank stat, BUT - this will ...
15:24 JeeLabs Café Weblog: RE: Getting back in the groove
JohnO,
As you may be aware, I started monitoring my water storage many moons ago, along with a requirement to manage...

2015-09-19

18:21 JeeLabs Café Weblog: RE: Bandwagons and islands
Like almost everyone else, I have a few of these, mainly 12’s.
The problem (compared to use of stuff like ATxxxx + r...

2015-04-22

09:58 JeeLabs Café Support: RE: Interfacing a Jeenode to a thermostat
JohnO wrote:
\> I am still minded to continue researching alternatives but in the spirit of tinkering here is the bac...
09:55 JeeLabs Café Support: RE: Interfacing a Jeenode to a thermostat
@JohnO,
I’m still a fan of my original proposal(s) - using a relay (mains or LV) to take your old Stat “Out Of Band”...

Also available in: Atom