General

Profile

alberani

  • Email: jeelabs@mimante.net
  • Personal page (URL): http://www.mimante.net/
  • Registered on: 2013-06-22
  • Last connection: 2014-01-26

Issues

Projects

Activity

2014-01-26

22:28 JeeLabs Café Support: RE: Jeenode Micro interrupts
JohnO wrote:
\> I use the enclosed code with success.
Impressive work! :-)
In the end, it seems that referring to t...
15:18 JeeLabs Café Support: Jeenode Micro interrupts
Can someone point me to a working example of interrupt handling on Jeenode micro (on the I pin or any other pin)?
I’...

2013-06-26

22:08 JeeLabs Café Support: RE: JNu: radio does not receive/send
Nope. :~~(
Never seen +3 between ground and output of the PFET (and I’m pretty sure the code is correct).
I’ve even t...

2013-06-24

22:11 JeeLabs Café Support: RE: JNu: radio does not receive/send
First of all, thanks again to everyone for the help.
Still no luck, but:
\# I was wrong, there’s **no power between ...

2013-06-23

21:53 JeeLabs Café Support: RE: JNu: radio does not receive/send
JohnO wrote:
\> What are your JNu fuses set to?
$ avrdude -C /etc/avrdude.conf -P usb -c avrispmkII -p t84 -v -v...
20:32 JeeLabs Café Support: RE: JNu: radio does not receive/send
martynj wrote:
\> *@aberani,* did you mean CR2032?
Yep, pardon: a CR2032. I’ve replaced it with a newer one, with 3....
16:39 JeeLabs Café Support: RE: JNu: radio does not receive/send
alberani wrote:
\> @martynj: I’ll try to do some test.
The rf12 module **seems** to be powered (at least, there’s \~...
09:54 JeeLabs Café Support: RE: JNu: radio does not receive/send
@martynj: I’ll try to do some test.
The Micro is a pre-assembled, direct power unit, powered using a CR1220 battery ...
09:23 JeeLabs Café Support: JNu: radio does not receive/send
I’ve programmed my **JeeNode Micro v3a** using an Olimex AVR-ISP-MK2 and a custom cable.
I can control the I/O ports...

Also available in: Atom