Project

General

Profile

dofami's activity

From 2013-01-20 to 2013-02-18

2013-02-18

20:44 JeeLabs Café Support: RE: Jeenode won't start!!!
I got my USB BUBII from Jeelabs.
I put it together. I connect everything, I plug the USB and … nothing !
The guys of ...
dofami

2013-02-16

14:25 JeeLabs Café Support: RE: Jeenode won't start!!!
After talking with the support, I decided to buy another FTDI board; the USB BUB from Jeelabs.
I am waiting for my pa...
dofami

2013-02-11

15:24 JeeLabs Café Support: RE: Jeenode won't start!!!
dofami wrote:
\> Hi guys,
\> Still me and still does not work.
\>
\> I recheck the values of the hardware with my mul...
dofami
12:11 JeeLabs Café Support: RE: Jeenode won't start!!!
Hi guys,
Still me and still does not work.
I recheck the values of the hardware with my multi meters, and it appears...
dofami

2013-02-07

13:22 JeeLabs Café Support: RE: Jeenode won't start!!!
Everythings looks fine with the ATMega legs.
I will try the RX-TX trick.
I have the feeling that is not the FTDI boa...
dofami
13:07 JeeLabs Café Support: RE: Jeenode won't start!!!
dabbishaw wrote:
\> My LEDs are off when idle.
Thanks for your feedback.
dofami
12:29 JeeLabs Café Support: RE: Jeenode won't start!!!
I found the hardware check [http://forum.jeelabs.net/comment/3728\#comment-3728].
I pass all the check with the right...
dofami
10:53 JeeLabs Café Support: RE: Jeenode won't start!!!
dabbishaw wrote:
\> I’ve de soldered one once without problem. But I’d take JohnO’s caution as he’s got way more expe...
dofami
10:52 JeeLabs Café Support: RE: Jeenode won't start!!!
It seems to have more than one issue.
I rechecked all my solder joins and close the D1/SJ3 jumper.
The situation is ...
dofami

2013-02-06

14:22 JeeLabs Café Support: RE: Jeenode won't start!!!
You are right; I need to improve my solder joins and I will ! :o)
I did not know that the D1/SJ3 jumper must be sold...
dofami
12:08 JeeLabs Café Support: RE: Jeenode won't start!!!
First of all, thank you for your comments. I was pretty lost with my problem.
I am sure the capacitor is in the right...
dofami

2013-02-05

18:13 JeeLabs Café Support: Resolved: Jeenode won't start!!!
Hi there,
I finally decided to solder on one of my Jeenode v6 I purchase some time ago.
It is my first attempt in the...
dofami
 

Also available in: Atom