Project

General

Profile

"Serial" errors while compiling sketch for Tiny84

Added by Jas2 almost 4 years ago

Hi,

I am able to get the Blinky sketch successfully onto the Tiny84. I know this because when I power up the chip and place an LED across the appropriate pins it blinks.

Now I am trying to compile this sketch
https://github.com/nathanchantrell/TinyTX/blob/master/TinyTX\_DS18B20/TinyTX\_DS18B20.ino
for the Tiny84.

And there are problems, on the Arduino IDE 1.6.4, with what appears to be “Serial” in the Jeelib library.

The detailed post showing my set-up and the errors I am getting is here..
http://forum.arduino.cc/index.php?topic=328264.msg2266062

Can anyone help, please :) :)


Replies (1)

RE: "Serial" errors while compiling sketch for Tiny84 - Added by aw2xcd over 3 years ago

I ran into the same issue, if I remember correctly it was solved by installing the Attiny84 core files from the google code project by following manual steps and not through the Arduino IDE Library manager.
https://code.google.com/p/arduino-tiny/

    (1-1/1)