How to Prepare an Artificial Urine Sample for a Laboratory Test

How to Prepare an Artificial Urine Sample for a Laboratory Test

There are many reasons why you might need to provide a urine sample for a laboratory test. Perhaps you are applying for a job that requires a drug test, or maybe you are being tested for a medical condition. Whatever the reason, if you need to provide a urine sample, it is important to know how to prepare it correctly.check out this guide further,

To prepare an artificial urine sample, you will need:


  • A container that can hold at least 30 mL of fluid (this can be a cup, bottle, or beaker)
  • A clean funnel
  • A synthetic urine powder or premixed synthetic urine solution
  • A container of distilled water

Follow these steps to prepare your artificial urine sample:

  1. Pour 30 mL of distilled water into your container.


  1. If you are using synthetic urine powder, add the recommended amount to the distilled water and stir until the powder is completely dissolved. If you are using premixed synthetic urine, skip this step. 


  1. Funnel the mixture into the clean container. Make sure that the container is half-full so that there is room for shaking.


  1. Close the container tightly and shake vigorously for 30 seconds. 


  1. Place the container in a microwave-safe dish and heat on full power for 10 seconds. Remove the container from the microwave and allow it to cool until it reaches body temperature (approximately 37°C). 
  2. Check the temperature of the urine with a thermometer before submitting your sample. The ideal temperature range is 32-38°C; if your sample is outside of this range, reheat or cool as necessary and retest before submitting.


  1. Your artificial urine sample is now ready for submission! Be sure to label it clearly with your name and the date so that laboratory personnel can easily identify it.


Note: If you are submitting your sample in person, be sure to arrive at your appointment on time so that your sample does not have time to cool.


Note: If you are submitting your sample by mail, be sure to include an ice pack so that it arrives within the ideal temperature range. 


Warning: Do not use microwaves with foil lining as this can cause sparks and potentially start a fire.




Preparing an artificial urine sample may seem like a daunting task, but it’s actually quite simple if you know what you’re doing. With just a few supplies and some elbow grease, you can create a high-quality sample that will fool even the most experienced laboratory technician. Just remember to check the expiration date on your synthetic urine before getting started, and heat the synthetic urine to body temperature for best results. 


An artificial urine sample is a necessity if you need to provide a urine sample for a laboratory test but cannot provide a natural one due to concerns about privacy or contamination. It is important to know how to prepare an artificial urine sample correctly in order to avoid potential issues with accuracy or contamination. By following these simple steps, you can be sure that your artificial urine sample will be ready for submission in no time!


Share this post

Post Comment