General

Profile

sanb

Issues

Projects

Activity

2019-06-19

17:12 JeeLabs Café Support: Can one change the baud rate of RFM69 (to increase the range)
Is there a way to reduce the baud rate at which the RFM69 sends/receives packets? I see some code that suggests that...

2019-06-15

06:48 JeeLabs Café Support: RE: JeeLib for RFM69CW connected to ATTiny88
FYI:
I hooked up the RFM69CW module with the ATTiny88 programmed to run at 8MHz with a sketch that does a wireless...

2019-06-12

22:44 JeeLabs Café Support: RE: JeeLib for RFM69CW connected to ATTiny88
Just FYI (and for completeness, as I make progress):
I was able to get past the compile-time problems when compili...

2019-06-07

04:17 JeeLabs Café Support: JeeLib for RFM69CW connected to ATTiny88
Hi,
I am beginning to use ATTiny88 (instead of ATTiny84 which I have been using so far) with an RFM69CW connected ...

2018-10-17

06:12 JeeLabs Café Support: RE: Can the digital I/O pins on the RFM69CW be used to control other logic lines?
Hi,
Updates from past several months of operation: The circuit I posted in the previous post has now been working...
05:48 JeeLabs Café Support: RE: Jeenode Micro receiving "native packets"?
Hi all,
I have been feeling the same as Rolf! While I am myself guilty of not writing on the forum lately, I have...

2018-06-30

05:47 JeeLabs Café Support: RE: Can the digital I/O pins on the RFM69CW be used to control other logic lines?
@martynj
I have finally made progress. Using the circuit posted in the previous message, I am now able to run th...

2018-06-11

05:21 JeeLabs Café Support: RE: Can the digital I/O pins on the RFM69CW be used to control other logic lines?
@martynj,
Thanks very much for your time for this. I am attaching a modified circuit that I have recently tested....

2018-06-04

06:14 JeeLabs Café Support: RE: Can the digital I/O pins on the RFM69CW be used to control other logic lines?
@martynj
Apologies for the silence on this. I haven't been able to get to testing your idea yet - partly because ...

2018-05-04

20:23 JeeLabs Café Support: RE: Can the digital I/O pins on the RFM69CW be used to control other logic lines?
Thanks @martynj. I will certainly try this out and report back here with what I find. Thanks for the schematic also...

Also available in: Atom