General

Profile

SabineT

  • Registered on: 2017-06-13
  • Last connection: 2018-11-13

Issues

Projects

Activity

2018-11-13

17:44 JeeLabs Café Support: RE: folie v2 not anymore on github?
I found the source for v2.15 here: https://git.jeelabs.org/jcw/folie
Regards,
Sabine

2018-05-02

10:35 JeeLabs Café General: RE: OOK 868MHz weather stations on JeeNode (Alecto WS4000, WS3000, DKW2012, Fine Offset WH1080, WH1081)
Thanks! I will look on it. My final goal is to receive my WH1080 station and send the data to a MQTT broker.
Regar...
07:51 JeeLabs Café General: RE: OOK 868MHz weather stations on JeeNode (Alecto WS4000, WS3000, DKW2012, Fine Offset WH1080, WH1081)
SevenW wrote:
> I have implemented OOK decoders for the Fine Offset WH1080-series and OEM versions: Alecto WS4000, W...

2017-12-02

20:06 JeeLabs Café Support: RE: RFM69 breakout board, capacitors?
BTW: the documentation is on https://jeelabs.net/projects/hardware/wiki/RFM12B_Board at the bottom of the page, just ...
08:49 JeeLabs Café Support: RE: RFM69 breakout board, capacitors?
Compared with the JeeNodes I would say C2 is 100nF and C3 is 4.7μF
Regards, Sabine

2017-10-26

09:13 JeeLabs Café Support: RE: JNZ Forth access to EEPROM?
I think you should add the constant definitions and the ee! sub to [flib/stm32l0/hal.fs](https://github.com/jeelabs/e...

2017-10-22

17:01 JeeLabs Café Support: RE: JNZ Forth access to EEPROM?
Thanks for adding the example!
14:26 JeeLabs Café Support: JNZ Forth access to EEPROM?
Hi!
JNZ uses the STM32L052, which has 2 kB EEPROM. But I don't find in Embello, how to access this EEPROM. Are the...

2017-10-12

16:37 JeeLabs Café General: RE: JeeNode Zero No RF
hmh, no response is bad response. :-(

2017-10-06

17:33 JeeLabs Café General: JeeNode Zero No RF
When will the JNZ No RF or 433MHz be available again? In the shop I can add it to my cart, but at checkout it says "s...

Also available in: Atom