General

Profile

Wonkavator

  • Registered on: 2017-11-21
  • Last connection: 2017-11-27

Issues

Projects

Activity

2017-11-27

22:18 JeeLabs Café Support: JeenodeSMD and JeeNode Micro - Timed Send/Recv
Hey there, my next approach is to let the JeeNode Micro communicate by using the example [Time-controlled transmissio...

2017-11-24

22:55 JeeLabs Café Support: RE: Upload blink Sketch to Jeenode Mirco
That was helpful. Did not think about this debugging approach.
1) Putting the red cable showed me, that the LED is...
22:03 JeeLabs Café Support: RE: Upload blink Sketch to Jeenode Mirco
All right, I dont really get what I should try. Except change the wiring :)
PWR -> ?
GND -> ?
DigitalLEDPIN -> ?...

2017-11-22

21:05 JeeLabs Café Support: RE: Upload blink Sketch to Jeenode Mirco
The blue LED wire is connected to GND (pin4). The red LED wire is connected to DIO2 (pin8).
And I power the Jeenod...
20:27 JeeLabs Café Support: RE: Upload blink Sketch to Jeenode Mirco
Sure
Arduino [Blink Example Sketch](https://www.arduino.cc/en/Tutorial/Blink)
The only difference is that...
20:00 JeeLabs Café Support: Upload blink Sketch to Jeenode Mirco
First, I would like to thank you for this great micro controllers.
They are just the hardware I was looking for.
...

Also available in: Atom